New Models Coming

 Just a little busy with work at the moment, but my practice time on FreeCAD is really adding up. (I take my laptop to work and try to knock out a quick tutorial each night). 

Without giving away too many specifics, some of my newest models will be gardening themed... specifically simple indoor growing systems.

I'm also designing some cool LED signs, and a few things for Halloween (even though I know that's a while from now). 

Embracing the Beast!


You know, when you slap yourself in the face enough times you can really learn something. Let's face it, there are no easy CAD software solutions for making your own 3D models that are free. Even the cheapest ones are like $40 a month (we all love this subscription based new era of not owning ANYTHING) or even upwards of $200 a month. If they are free it comes with a major catch like 'anything you make we own and we are gonna let everyone make money off it except you'.  

Little things like that.

Well I try not to swear but I'm tired of paying a monthly fee for every F-ing thing I have or use. Even my Internet provider tried to tell me the WiFi built into the modem/router they provide me is $5 extra a month. I said whoa there Mr. Milk and Honey, I got 3 routers of my own so take that off my bill. So yea, I actually can't use the WiFi feature that is already present in the equipment because I refuse to pay extra for it. Stop and think about that crap for a moment. It's like buying a new car except you can't drive at night because turning on the headlights costs $5 a month. Whoops, I probably just gave some corporate creep a new idea. My routers are better anyway.

Back to the topic:

So I decided to start climbing the mountain known as FreeCAD. The truly free, open source, CAD software package. It's at version 0.21 at the time of this post. That's a long way from version 1.0, and it's been between versions 0.18 and 0.21 for a few years. But there are a lot of people dedicated to the project.

You could say FreeCAD has some bugs and you would be right. You could say it is convoluted, confusing, and all the tutorials out there on YouTube often don't work because they are for version 0.??.??, and you would be also right. You could say that I learned how to do that in 60 seconds in the free version of -insert you poison- CAD ... and if I want to figure out how to do it in FreeCAD I'll have to watch like 5 videos and spend 3 hours for a simple vase/box/whatever.

And you would be right.

But it's like stopping smoking... or giving up crack. You gotta throw away your bong. Smash those little glass tubes that came with the little rose inside (umm.. so I hear) Get rid of your ash trays. Look at that last pack of cigs and say to yourself 'I know this little box of cancer sticks that has a huge warning on it that I ignore is bad for me, but I got filament to buy.' 

That may be a bad analogy for you, but that's how I stopped smoking. All the health warnings, nagging relatives, coughing, ... nada. It came down to the Benjamins and constantly being shackled to the local Stop-N-Stab to get a pack every other day. No withdrawal. Done. Just like that. It's not cold turkey, if you truly made up your mind to stop smoking or use a drug you just let it go and it's easy. No amount of nicotine patches or gum or methadone (all substitutes for a person who really hasn't made the decision to stop) will work. It is in your mind. Some people might argue with that, but I've been an addict, known a lot of addicts, and helped people quit and watched people die. 

Again I am off the rails here. FREECAD

So I said to myself, I refuse to pay anymore. I'm gonna learn how tame this beast. I'd do a tutorial, then a few days later I did it again. Ran into moments where I could just export what I got and import it into TinkerCad to finish up... but NO!! I am going to figure out how to do it in FreeCAD.

I'm really just getting started on my journey to learn all of FreeCAD, but the boat is moving ... and it's moving FAST. I can now do just about everything I could in those more polished programs in FreeCAD. I can do it OFFLINE. And I can do it WITHOUT A SUBSCRIPTION. 

Looking back, I did the same thing with GIMP. I refused to pay the insane price of Photoshop and learned how to use the fully open source GIMP program. I actually put together a very large art portfolio that made me quite a chunk of change. Like FreeCAD, GIMP is also very complex with a steep learning curve. Photoshop isn't exactly a walk in the park, but the benefit of premium apps is an abundance of up-to-date tutorials, online courses, etc.. These days I can do in GIMP what just about any fresh college grad can do in Photoshop. 

Inside of a few months, I'll be able to say that about FreeCAD. 

Peace out - Wyqid

Cool Breeze


Need a desk fan but don't have room on your desk? Yep, me too. So I created this wall mount kit for a 12025 (120mm square by 25mm deep) computer fan. 

Download the STL files on Printables